All Products

Four module DIN rail mounted Energy pulse LED -/1A or -/5A current transformer input Single phase or three phase network compatible Programmable voltage and current transformer ratio True RMS measurement High definition white backlit LCD display Cost effective and accurate Simple programming and operation Modbus or Mbus communication Auto and manual page scrolling

he M552 C-Tran is a Current Transformer complete with an integrated, fully programmable, three phase power transducer. It provides two isolated RS485 communication ports both using Modicon's Modbus protocol.

The M240-RCM Multicoil offers a flexible alternative to conventional solid, and split core, current transformers. With a wide operating range and extremely easy installation, they are perfect for use in retrofitting applications, or when the load simply cannot be disconnected for installation.

The M850-LRC is a unique combination of a 3 phase digital universal metering system and Rogowski coils. It can be used on any voltage system with a wide range of inputs, and incorporates a universal AC or DC auxiliary power supply.

MultiPower M850 is a low cost 96x96mm cased three phase power meter. It measures line Voltages and Currents, Neutral Current, System Frequency, System W, A and VA Demands, System W, A and VA Maximum Demands, System Active Power, System Reactive Power, System Apparent Power, System Active Energy, System Reactive Energy and System Power Factor.

Un AC 690 V / DC 250 V, size 22×58, aM - motor characteristic only against short-circuit, Cd/Pb free

Ie 125 A, Ue AC 690 V/DC 440 V, for cylindrical fuse-links 22x58, 3-pole design, without signalling

Un AC 500 V / DC 250 V, size 000, 00, 1, 2, 3, 4a, gG - general purpose characteristic, Cd/Pb free

These fan heaters prevent formation of condensation and provide an evenly distributed interior air temperature in enclosures with electric/electronic components. The heaters are connected using the internal terminal connectors. The small size of the CS / CSL 028 heaters make them ideal for use in enclosures where space is at a premium.

The Flat Heater CP 061 is used to provide an evenly distributed temperature within enclosures and cabinets with electric/electronic components. Its ultra-thin design makes it particularly suitable for high-density applications for which standard enclosure heaters are often too big in size. Depending on the application, the Flat Heater can be used as a convection heater or as a contact heater. When used as a contact heater it offers thermoconductive contact to a component or a cabinet wall in need to be heated. Additionally, a mounting system especially designed for the CP 061 allows for the compensation of an expansion of the heater body as a result of the heating-up when in operation. Operated as a convection heater, the slim heater CP 061 warms up the ambient air within a cabinet. The CP 061 is designed for continuous operation.

These heaters are used in enclosures where damage from condensation must be prevented, or where the temperature may not fall below a minimum value. The aluminium profile heater body design has a chimney effect and distributes the heat evenly. The heaters are designed for permanent operation. Pressure clamb connectors save time and simplify installation.

Touch-safe heater for the use in enclosures with electrical/electronical components. The design of the heater supports the natural convection which results in a high air-current of warm air. The surface temperatures on the accessible side surfaces of the housing are kept down as a result of the heater design. Our complete range of thermostats and hygrostats can directly be connected to the heater CS 060. This heater is also available in a version with plug-in thermostat requiring no additional wiring (CSF 060). The heaters are designed for permanent operation.